Our price list
8 hp Cylinder Block for 1904 | Size (Where applicable) |
Price | ||
100mm bore x 120mm stroke supplied fully machined casting ready to fit with water outlet and blanking ports and with valve guide in two coats of primer |
Only one left in stock
I do have three unmachined castings available October 2022 |
£2855.00 |
6 hp Cylinder Block for 1904 | Size (Where applicable) |
Price | ||
90mm bore x 110mm stroke supplied fully machined casting ready to fit with water outlet and blanking ports and with valve guide in two coats of primer | £2750.00 |
4.5 hp Cylinder Head for 1901 | Size (Where applicable) |
Price | ||
84mm bore x 90mm stroke supplied fully machined casting ready to fit with water outlet and blanking ports and with valve guide and exhaust outlet with two coats of primer |
5 Machined Castings Available October 2022 |
£2750.00 |
8 hp Cylinder block for 1902-03 | Size (Where applicable) |
Price | |
100mm bore x 110 stroke sold as unmachined casting only |
£780.00 |
Cast Iron Pistons 1898 - 1904 | Size (Where applicable) |
Price | ||
All supplied with piston rings, gudgeon pin and security screws. Also supplied with .020 thou oversize
8hp Pistons are on order October 2022
|
10 hp and 12 hp |
£ 530 - £600 |
Connecting Rods | Size (Where applicable) |
Price | ||
No bronze bearings supplied |
8 hp 274 centres |
£400.00 £375.00 £330.00 £310.00 |
Cast Iron Valve Guides | Size (Where applicable) |
Price | ||
10 hp 8 hp 6 hp 4 ½ hp 3 ½ hp 2 ¾ hp 2 ¼ hp 1 ¾ hp |
|
Exhaust Valves | Size (diameter/stem/length) | Price | ||
All slotted and available | 10 hp - 42mm x 12mm x 163mm 8 hp - 42mm x 9mm x 158mm 6 hp - 38mm x 9mm x 152mm 4 ½ hp - 38mm x 11/9mm x 135mm 3 ½ hp - 34mm x 9/8mm x 129mm 2 ¾ hp - 32mm x 8/7mm x 120mm 2 ¼ hp - 30mm x 6mm x 112mm 1 ¾ hp - 30mm x 6mm x 112mm |
£112.00 Please note 8hp valves are all sold out , New stock in April 2023 |
Exhaust Valve Springs | Size (Where applicable) |
Price | ||
10 hp |
£21 |
Exhaust Valve Spring Holders & Cotter Pins | Size (Where applicable) |
Price | ||
10 hp |
£24 |
Bronze Inlet Dome + Steel Screw | Size (Where applicable) |
Price | ||
10 hp |
£ 315.00 £ 315.00
other prices TBA
|
Automatic Inlet Valve Springs | Size (Where applicable) |
Price | ||
10hp - 8hp - 6hp - 4.5hp |
10 hp 8 hp 6 hp 4.5 hp 3.5 hp 2.75 hp 2.25 hp 1 75 hp |
£ 12 £ 12 £ 12 £ 12 £ 10 £ 10 £ 9 £ 9 |
Bronze Inlet Valve Elbows | Size (Where applicable) |
Price | ||
10 hp Two left 8 hp Two left 6 hp One left 4 ½ hp One left 3 ½ hp 2 ¾ hp one left 2 ¼ hp 1 ¾ hp |
£128 |
Contact Breakers Type 1: 1898-02 Models | Size (Where applicable) |
Price | |
10mm shaft and 12mm shaft sizes available |
Tricycle engine cams turn anti-clockwise the rest turn clockwise .
|
£615.00 |
Type 1 Contact breaker 1898 - 1902 Spares | Size (Where applicable) |
Price | |
Timing cam with fittings (10mm shaft) 12mm cam also available |
£78 | ||
Timing Blade with hammer and point | £48 | ||
Brass screw with tungsten point | £42 | ||
Aluminium Cover polished | £102 | ||
Pair of toggles in nickel | £46 |
Contact Breakers Type 2: 1902-03 Models | Size (Where applicable) |
Price | |
Supplied with timing cam + fittings including spare timing blade, 15mm depth and 36mm spigot. Shaft size 14mm | £720.00 |
Type 2 Contact Breakers Parts Available | Size (Where applicable) |
Price | |
Timing cam with fittings (14mm shaft) | £78 | ||
Timing Blade with hammer and point | £48 | ||
Brass screw with tungsten point | £42 | ||
Aluminium Cover polished | £110 | ||
Pair of toggles in nickel | £46 |
Type 3 Contact Breaker 1904 | Size (Where applicable) |
Price | |
Supplied with timing cam and fittings and with spare timing blade, spigot 36mm, 25mm depth, 14mm shaft size | £875.00 |
Type 3 Contact Breaker spares | Size (Where applicable) |
Price | |
Timing cam with fittings | £78 | ||
Spring steel contact blade | £33 | ||
Brass screw with point | £42 | ||
Tension spring for adjuster | £10 | ||
Brass adjuster wheel + pin | £30 | ||
Aluminium cover polished | £140 | ||
Cover locking and spring | £38 |
Type W Contact Breaker for Twin Cylinder | Size (Where applicable) |
Price | |
10 hp - 1904 Supplied with double timing cam and fittings and two spare blades. Shaft size 14mm and spigot size 36mm |
Only one left in stock |
£1476.00 |
Ignition Switches | Size (Where applicable) |
Price | |
for low voltage use only | Small switch | £92.00 | |
Large switch | £132.00 |
Water Pump Safety Springs | Size (Where applicable) |
Price | |
Long single cylinder spring | 108mm length | £16 | |
Short single cylinder spring | 84mm length | £16 | |
Vis a vis short spring |
55mm length Not shown in picture |
£14 | |
Twin cylinder short spring | 50mm diameter | £19 | |
Tension packing spring | 36mm diameter | £14 |
Radiator Script Badge in Brass | Size (Where applicable) |
Price | |
Supplied with all fittings + Also suppled in Nickel |
273mm Long | £165.00 |
Radiator Script Badge Set | Size (Where applicable) |
Price | |
Supplied with all fittings + Also suppled in Brass and nickel plated |
Brass Nickel |
£74.00 |
Bonnet Catches in Brass and Steel | Size (Where applicable) |
Price | |
The catches will need to be painted the colour of the coach paint, supplied with springs and cotter pins |
+ They do not come with with bonnet clips .
Out of stock |
£195
|
6 HP Exhaust Outlet | Size (Where applicable) |
Price | |
Only 2 left in stock |
£110 |
China Insulators for single and twin cylinder engines | Size (Where applicable) |
Price | |
Single cylinder # Twin cylinder insulators Originals |
Still available |
£ 28.00 £ 35.00 |
Crankcase Breather for Engines | Size (Where applicable) |
Price | |
Brass Breathers for engine timing cases with ball bearing fitted |
10hp 8hp 6hp |
£43.00 |
Tension Return Spring for Valve Lifter | Size (Where applicable) |
Price | |
These springs keep the tension on the valve lifter |
£ 50.00 |
Crankcase Breather for Engines | Size (Where applicable) |
Price | |
One size fits all from 2 3/4 to 8hp Out of Stock
|
£80 |
Brass Sump Oil Drain Tap | Size (Where applicable) |
Price | |
For 10hp - 8hp - 6hp engines |
£145 |
Small Triangle Brass Plate | Size (Where applicable) |
Price | |
For the License by The British Traction Co Ltd and the The Dion Dunlop Motor Co Ltd, No 2133 |
£38 |
Polished Brass Side Plates | Size (Where applicable) |
Price | |
Marked Made in France. Supplied by 10, Great Marlborough Street, London W | 410mm X 30MM |
£75.00 |
Brass Body Plates | Size (Where applicable) |
Price | |
For Type D, E, G, O, K, Y, V, R, N, Q, W All supplied with blank chassis numbers for you to stamp your own numbers on |
£33- |
Carrosserie Brass & Nickel Body Plates | Size (Where applicable) |
Price | |
Nickel plated Brass |
£32 |
Lapel Badges | Size (Where applicable) |
Price | |
2 Sizes: |
£4.00 each
|
Grease Gun Leather Cup Washers | Size (Where applicable) |
Price | |
Set of replacement leather washers including copper rivets |
£40.50 |
Dashboard Oiler Replacement Leather Cup | Size (Where applicable) |
Price | |
Set of replacement Leather washers including copper rivets |
£42.00 per set |
Marque Deposee - De Dion Bouton | Size (Where applicable) |
Price | |
Gold transfers for the rear of a tonneau door and can be cut away for mounting on side of body | 21cm Length 10cm Roundel |
£12 |
Marque Deposee - De Dion Bouton | Size (Where applicable) |
Price | |
Gold self-adhesive stickers for the side of a tonneau door and can be cut away for mounting on side of body | 21cm Length 10cm Roundel |
£12 |
Coil Box for Single Cylinder Coil | Size (width/Depth/Height) (Where applicable) |
Price | |
Fittied with brass Marche - Arret switch and two brass supporting straps. With Nelmelior stamped on the front |
172mm x90mm x220mm
5 in stock |
£395.00 |
Handmade Mahogany Battery Box | Size (Where applicable) |
Price | |
Originally for fitting the DDB dry batteries in and they were fitted on the left hand side of the bulkhead. (with brass support bands and locking hinges) |
330mm wide, 93mm and 234mm height
One in stock |
£425 |
Albert Lefebvre Greasers | Size (Where applicable) |
Price | |
Supplied in nickel or polished brass | NO 1 - Small NO 2 - Medium NO 3 - Large |
£70.00 |
Vis a Vis Oil Reservoirs for engines and gearboxes | Size (Where applicable) |
Price | |
Nickel plated |
The Gear box oiler holds 60 ml of oil
The Engine oiler holds 80 ml of oil |
Out of Stock TBA |
1899-1900 Tricycle Cylinder Head | Size (Where applicable) |
Price | |
2 ¼hp or 2 ¾hp cylinder heads for aircooled Tricycle engines supplied unmachined | 2 ¼ hp - 70mm 2 ¾ hp - 74mm |
£275 |
1898 Tricycle Cylinder Head | Size (Where applicable) |
Price | |
1.75hp for the screw in automatic valve (supplied unmachined) |
£195.00 |
Tricycle Cylinder Head Gasket | Size (Where applicable) |
Price | |
2 ¾ hp 2 ¼ hp 1 ¾ hp |
£20.00 |
Tricycle Badge for Surface Carburettor and Battery Box | Size (Where applicable) |
Price | |
Finished in dull Nickel Plate |
Caburettor Badge Battery Box Badge |
£110 |
Tricycle Battery Box | Size (Where applicable) |
Price | |
Made of steel with hinge and closing rod |
(w/d/h) 313mm x 70mm x 196mm
SOLD OUT |
£160.00 |
Tricycle Aluminium Gear Housing | Size (Where applicable) |
Price | |
Supplied in one piece to be machined and polished |
I have some polished Gear housings in stock please ask for price . |
£149.00 |
Tricycle Bronze Gear for 102 - 104 - 106 Teeth | Size (Where applicable) |
Price | |
Rough Casting Available. Earlier gear pattern
|
Casting weight is 5.5 kilos |
£118.00 |
The Tricycle Book 1895 - 1902 Part #1 | Size (Where applicable) |
Price | |
The Tricycle Book 1895 to 1902 Part 1
350 pages with and 700 Illustrations
|
Size 12 " x 9.5 " Part 2 available in October 2019 |
£ 80.00 UK post £ 8.00 Europe £ 12.00 Rest of World Please ask for Price |
An illustrated guide to the type & specification 1905 - 1914 | Size (Where applicable) |
Price | |
TBA |
TBA |
£TBA |
An illustrated guide to the type & specification 1899-1904 | Size (Where applicable) |
Price | |
This will be of interest to all veteran car enthusiasts with the appetite to learn more about the vehicles produced at the turn of the century by the worlds largest engine manufacturer. With the help of more than 50 line drawings and 150 card photgraphs this book sets out to trace the course of vehicle development, summarises the essential technical information, and clearly identifies the characteristics of each type in 96 pages. Author: Michael Edwards |
12' x 9' 3/8
|
£25 inc P&P (UK)
Sold out But there maybe a Reprint later |